ANTARIS – Wind-powered heating...

...clean and cost-effective!
3.5 kW (6.5 kW, max.), alternatively 6.0 kW (12.0kW max.)

 

 

 

 

 

 

 

 

 

This control system features control electronics with wind characteristic management capability. This enables the ANTARIS 3.5/6.0 kW to start up from an off-load state with smooth transition to the optimum speed range to achieve the greatest possible heating power output.

For the controller to operate in the proper manner, a heating element must be selected with twice the nominal output of the generator (3.5 / 6.0 kW) as the voltage can otherwise not be maintained. The 7.0 / 12.0 kW heating element is screwed into a water buffer storage unit, with the higher heating power output and rotor-blade protective positioning serving as additional storm safety net.

Unlike a thermal solar-based system, the ANTARIS harvests most energy in the "cold and windy" time of the year, i.e. when it is also actually needed! However, a combination of both systems in the form of a hybrid plant is altogether worthwhile.

Optionally, you can also combine heating-system with grid-connected operation. When water-tank temperature is reached, automatic soft switch-over takes place and the Windy Boy inverter cuts in.

 

Technische Beschreibung:

• Anschluss Gewindegröße Heizstab: 1 1/2 " AG
• Leistung der Heizstäbe:                     6.0 kW
• Länge der Heizstäbe: Einschraublänge 450 mm
• Generatorleistung auf der DC-Seite 500VDC/12ADC max. bis 12kW
• Generatorkurzschlussschalter
• Anschlusssmöglichkeit für 2 Heizpatronen mit je 6.0 kW
  (oder Bremswiderstand) mit Temperaturschaltern, und Windy Boy
• integrierter Lüfter zur Platinenkühlung mit Temperatursensor
• kennliniengesteuert
• wahlweise umschaltbar Heizung / Netz
• Spannungsversorgung über das Stromnetz (Normalbetrieb),
  bei Netzausfall wird automatisch auf Generatorversorgung umgeschaltet
• Visualisierung (Touch-Panel)
• alle Einstellungen und Statusanzeigen erfolgen über das TP

 

This control system can be used for all windturbines with 3-phased AC alternators in the 1.0 kW - 6.0 kW output class.
The controll system is matched to the turbine`s specific voltage and power output.

You, too, can put the heat on rising energy prises!